Dodge Tow Bar Wiring Installation And Review Videos

Roadmaster Diode Flexo-Coil Wiring Kit Installation - 2015 Dodge Durango- Video

Today on our 2015 Dodge Durango, we're going to be taking a look at installing the Roadmaster Diode 7-wire to 4-wire, flexo-coil wiring kit, part number RM-15247. This is what the wiring kit looks like when it's installed on a vehicle. This is about the only part you're going to see is right up here, this connector at the front, which is a full round connector. It's got this nice, spring-loaded cover, and it bolts up onto the base plate. Then the wiring runs back through your rear tail lights in order to send the power from your RV through the wiring in order to give you lights on your vehicle. You've got brake, turn, and turn lights back there when driving your RV. Something that's really nice about this is that it comes with diodes, and what those allow you to do, you mount those just inside where your tail light assemblies are. Those are there in order to help isolate the power coming through this system from your vehicle's electrical system. more

6/7/2016 9:56:06 AM

Roadmaster Diode 7 to 6 Wire Coil Kit Installation - 2005 Dodge Ram Pickup- Video

Today on our 2005 Dodge Ram 2500, we're going to be taking a look at and installing the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit, Part Number RM-15267. Now that we have it installed, you can see this nice coiled 7-way to 6-way power cord. It's coiled to keep it up off the ground. It'll stretch out and come back as it needs you as you turn the corners with the vehicle and the tow coach. Now, we can go ahead and test our system. We can try our tail lights, our left turn and brake, and our right turn and brake. Now, with our Tow Doctor hooked up, we're not going to get both bulbs on the brakes to flash at the same time, but if you have a turn signal bulb, it's going to be that they share the brake bulbs, so if that one's working, your brake bulb's going to work also. Let's go ahead and show you how to install it. more

2/11/2016 3:26:59 PM

Blue Ox Tail Light Wiring Kit Installation - 2009 Dodge Ram Pickup- Video

All right, today on this 2009 Dodge Ram pick-up 1500 series quad cab, we're going to install part number BX8869. This is a Blue Ox taillight wiring kit bulb and socket. To start off our install, we're going to take our wire harness with the four wires and we're going to run it through the front of the truck going towards the back. Now our truck has a six volt connector that is previously installed on this truck. This was installed as a part as a base plate installation kit. So I'm going to go ahead and take it back apart and then go ahead and run our wiring through. more

1/13/2014 4:58:28 AM

Roadmaster Tow Bar Wiring Kit Installation - 2008 Dodge Ram- Video

Today on our 2008 Dodge Ram 1500 Pickup well be installing the Roadmaster Universal Power Diode Wiring Kit, part number rm-154. To begin our install well start at the front of the vehicle where well take a 4-pole connector and secure it to the baseplate. To secure it to the baseplate well use some black zip ties. Then as we route the wiring to the back of the vehicle, well use the black zip ties to secure it as necessary. Keep in mind when routing your wires youll want to stay away from moving components such as steering or suspension, or excessive heat such as the exhaust. With this application well also be able to route the wire into the frame channel to the back of the vehicle where it will assist in helping protect the wire. more

5/29/2013 3:59:01 PM